MXP-RSPNSII-PIOL-03
The Mithix Pro Shovel and Rake Combo is purposely made to fit in smaller compartments, deployment containers, foot lockers, peli-style cases, smaller vehicles, emergency vehicles, aircraft, on tool trays, etc. It is a 3-piece system that incorporates a standard size shovel and rake that share a common handle at their midsection. The overall length when either are coupled is approximately 60” but all three pieces are each approximately 30” when taken apart for storage/transport. Made in USA and Berry Compliant.

Mithix Pro makes low cost inert IED Trainers and Training Aids for IED training Identification and interactive training scenarios. Most of these inert training devices are resettable for use over and over again while low-cost enough to be disposable if deploying disablement actions. Either way, our devices will provide realistic training for both the knowledgeable EOD/Bomb Squad Operators as well as the support elements deployed to ID and call in the threat. Listed are some of the more common Trainers/Training Aids but many others are available; contact us for details. Available only to Law Enforcement and Military Organizations.

MXP-TA-LM-MR – Inert Limpet Mine Trainer, monitored, resettable
MXP-TA-LM – Inert Limpet Mine Trainer, non-functional
MXP-TA-PB-MR – Inert Pipe Bomb Trainer, monitored, resettable
MXP-TA-PB – Inert Pipe Bomb, non-functional
MXP-TA-8WAB – Inert 8-Wire Attack Box; 4-wire pairs of unique circuitry for wire attack training
MXP-TA-IEDBOX – Inert IED in a Box Trainer; Switchable selectable 4-circuit training device with LED and siren monitors
MXP-TA-IEDBOX-EXT – Inert IED in a Box Trainer; Switchable selectable 4-circuit training device with external monitor outputs
MXP-TA-RD – Inert Radio Device
MXP-TA-CD – Inert Cell Phone Device
MXP-TA-SV-BC – inert Suicide Vest, Berry Compliant (without inert charges)

Mithix Pro provides wire attack tools, sets and trainers for wire attack. In fact, Mithix Pro is your only source for Continuity Confirmation Technology (CCT), a patented technology of internal circuitry that allows an LED to illuminate only when the bed-of-nails has made good contact with the target wire’s conductive internal wire strands. No more “pucker factor” guessing if the wire has been properly pierced/connected to. Standard bed-of-nails without CCT LED also available in addition to various jumper wire pairs, insertion tools and support equipment. Available in multiple sets and kits; also available with wire attack monitored trainers. Call for details and other accessories available.

MXP-WA6 – Set of 6 bed-of-nails wire interrogators
MXP-WA12 – Set of 12 bed-of-nails wire interrogators
MXP-WA6CCT – Set of 6 bed-of-nails wire interrogators, 2 are Continuity Confirmation Technology Interrogators and 2 Mini Hook leads and a set of jumpers
MXP-WA12CCT – Set of 12 bed-of-nails wire interrogators, including 6 Continuity Confirmation Technology Interrogators and 2 Mini Hook leads, 2 sets of jumpers and 1 pair of piercing macro hook to standard alligator hook leads.
MXP-TA-8WAB – Inert 8-Wire Attack Box; 4-wire pairs of unique circuitry for wire attack training
MXP-TA-IEDBOX – Inert IED in a Box Trainer; Switchable selectable 4-circuit training device with LED and siren monitors
MXP-TA-IEDBOX-EXT – Inert IED in a Box Trainer; Switchable selectable 4-circuit training device with external monitor outputs

MXP-UXOMETS 
The Mithix Pro UXO and Mine Excavation Tool Set is a 5 piece set of tools designed for search, identification and recovery of UXOs, landmines and IEDs. Each tool allows operators to carefully work in the exact vicinity of the explosive hazards. All are made with sturdy construction and cushion grips. Can be purchased with or without carry pouch. Also available as part of a broader kit of equipment in the UXO and Mine Excavation Kit (MXP-UXOMEK).

Mithix Pro UXO and Landmine Warning Signs are used throughout the world for marking suspect and actual hazardous areas, UXO’s, IEDs, Booby-traps, Landmines and Minefields. Our signs come in various shapes, sizes, materials, colors, prints and languages to satisfy the needs and requirements of the end user. We use UV resistant plastics, metals, laminates and inks to make signs long lasting in harsh environments. Sign stakes, kits, and complete area marking packages are available. Any language is possible, contact us today for details.

MXP-UXOMEK
The Mithix Pro UXO and Mine Excavation Kit is a complete set of tools enabling operators to carefully gain access to hidden, buried, partially buried or undergrowth obstructed UXO, IEDs, booby-traps, landmines and other potential hazards. Kit includes brush loppers and cutters, stakes, lines and markers, excavation trowels, probes and scrapers, a kneeling mat, a custom carrying pouch and much more. This Kit is a must have for Humanitarian Mine Action / Demining Teams as well as UXO Recovery Teams.

Used for explosive hazard search, mitigation, recovery and any other operations involving IED, UXO, landmine, booby-trap, military aircraft crash sites and anywhere potential explosive hazards may exist.

We manufacture many hazard marking tapes and flags, listed here; more are also available:
MXP-HAZMARK001 – Tape, Barricade 3 inch x 300 ft – Danger Do Not Enter, Red
MXP-HAZMARK002 – Tape, Barricade 3 inch x 300 ft – Danger Skull & Crossbones, Red
MXP-HAZMARK003 – Tape, Flagging Survey 1 inch wide Roll, Plain, Orange
MXP-HAZMARK004 – Tape, Flagging Survey 1.5 inch x 150 ft – Danger, Skull & Crossbones, Orange
MXP-HAZMARK005 – Flag, Hazard Marking 2x3x15 – Bundle, Plain, Orange
MXP-HAZMARK006 – Flag, Hazard Marking 2x3x15 – Skull & Crossbones, Orange
MXP-HAZMARK-007W – EOD Marking Flags (4”x5”) on 18” or 16” Steel Wire Shank, “EOD”, White (bundle of 100)
MXP-HAZMARK-007G – EOD Marking Flags (4”x5”) on 18” or 16” Steel Wire Shank, “EOD”, Green (bundle of 100)
MXP-HAZMARK-007R – EOD Marking Flags (4”x5”) on 18” or 16” Steel Wire Shank, “EOD”, Red (bundle of 100)
MXP-HAZMARK-007Y – EOD Marking Flags (4”x5”) on 18” or 16” Steel Wire Shank, “EOD”, Yellow (bundle of 100)
MXP-HAZMARK009 – Tape, Barricade 3 inch x 300 ft – Bomb Squad – Do Not Cross, Yellow
MXP-HAZMARK011 – Tape, Barricade 3 inch x 300 ft – Danger UXO, Red

MXP-HAZMARK011
Used in recovery operations or during ongoing conflicts to mark suspect or actual unexploded ordnance (UXO) hazards. Can be used by any personnel including search teams, damage assessment teams, EOD, recovery teams, peace keepers or anyone to help identify and protect lives from the potential hazards of UXO.

MXP-HAZMARK-007W (White)
MXP-HAZMARK-007G (Green)
MXP-HAZMARK-007R (Red)
MXP-HAZMARK-007Y (Yellow)

EOD Marking Flags (4”x5”) on 18” or 16” Steel Wire Shank

MXP-G10KNIFE (natural)
MXP-G10KNIFE-S (natural with sheath)
MXP-G10KNIFE-BL (black)
MXP-G10KNIFE-BL-S (black with sheath)
The Mithix Pro G10 Digging Knife is a heavy duty, high-durability digging probe made for digging and probing operations in austere environments. It has an overall length of approximately 10 inches with an approximate thickness of ½ an inch. It is non-metallic, non-conductive and non-magnetic making it well suited for operations in and around suspected IEDs and UXOs. It is machined from industrial grade super strong and reliable G10 material.  Available in black or natural color, with or without a sheath.  This tool is a must for EOD and similar operations.

MXP-TiKNIFE
MXP-TiKNIFE-WS (with sheath)

MXP-TBTL
The Tactical Bomb Tech Lite kit offers a variety of equipment to help meet the Tactical Bomb Tech program requirements. The kit includes: Standard Carabiner, Carabiner w/Roller, 1 Inch Hook, Titanium Pry Bar, Micro Break-Away Pulley, Pulley Opener, Endless Loop, 100ft Line on Winder, Rope & Wire Cutter and a Tactical Pouch to store the tools and components. The kit is highly customizable with Mithix offering customized kitting for all your TBT needs.

MXP-RSMK
The dual-purpose Reconnaissance and Marking Kit is comprised of components that help teams to search, find, identify, mark, and/or mitigate the hazards of unexploded ordnance (UXO), improvised explosive devices (IED), homemade explosives (HME) and other hazardous materials. The kit includes binoculars, laser range finder, compass, flashlights, tape, signs, a wide assortment of marking material, tools, mirrors and more.  All components are stored in a rugged backpack.

MXP-DIEDDK
MXP-DIEDDK-BC

The Mithix Pro Dismounted IED Defeat Kit contains a full suite of capability for Explosive Ordnance Disposal (EOD / IEDD), Bomb Squad, and Special Operations in a small size. The kit includes: a Backpack; the Compact Hook and Line Tool Kit featuring a compact version of the well known Mithix Pro Hook and Line kit components that you know and trust; high-strength low-stretch Dyneema Rope and tactical reel; a lightweight tripod; a telescoping pole with hook coupler; a Combat Explosive Exploitation (CEXE) Kit; a handheld metal detector, a set of hand tools, a knife, strap, wire and rope cutter set and other essential tools made specifically for Improvised Explosive Device (IED), remote movement and remote handling operations. All Components are housed in pouches, drop-down leg carrier with thigh straps and the backpack.

MXP-SSKB
The Mithix Pro Signal Kit was designed in cooperation with the US Army Special Ops for troops who may find themselves accidentally behind enemy lines or in emergency extraction / survival situations. Kit includes multiple means to visually signal, both day and night as well as directional and omni-directional devices. Other components include all-weather whistle, compass and friend or foe patches. All components come in small, lightweight MOLLE compatible pouch. Variations include visible light sources, Infrared versions and versions with Signal Lasers.

MXP-SSKB-VL1 Green Dot Laser
MXP-SSKB-VL2 Green Line Laser (as pictured)
MXP-SSKB-VL3 Green Dot and Line Combination Laser
The Mithix Pro Signal Kit was designed in cooperation with the US Army Special Ops for troops who may find themselves accidentally behind enemy lines or in emergency extraction / survival situations. Kit includes multiple means to visually signal, both day and night as well as directional and omni-directional devices. Other components include all-weather whistle, compass and friend or foe patches. All components come in small, lightweight MOLLE compatible pouch. Variations include visible light sources, Infrared versions and versions with Signal Lasers.

MXP-SSKB-IR1 – Dot Laser
MXP-SSKB-IR2 – Line Laser (as pictured)
MXP-SSKB-IR3 – Dot and Line Combination Laser
The Mithix Pro Signal Kit was designed in cooperation with the US Army Special Ops for troops who may find themselves accidentally behind enemy lines or in emergency extraction / survival situations. Kit includes multiple means to visually signal, both day and night as well as directional and omni-directional devices. Other components include all-weather whistle, compass and friend or foe patches. All components come in small, lightweight MOLLE compatible pouch. Variations include visible light sources, Infrared versions and versions with Signal Lasers.

MXP-TWD-VL1 Green Dot Laser
MXP-TWD-VL2 Green Line Laser
MXP-TWD-VL3 Green Dot and Line Combination Laser (as pictured)

The Trip Wire Detector (TWD) and Visible Laser Identifier (VLI) Kit is a combination of low tech and high tech solutions combined to give the user the best of both worlds to identify trip wire hazards. The TWD is a manual tool that incorporates a handle, telescoping rod and 15 feet of lightweight visual line to find trip wires. The user can use in two modes: as a short line hanging to the ground approximately 5 feet in front of the user that will provide a visual curl of the line when contacting a wire, or, as a longer standoff detector with 15 ft of line that is ‘cast’ forward like a fishing line that lightly drapes over any wires for a visual indication. The VLI provides a high powered green dot or line or dot and line laser (depending on model purchased) to help illuminate and identify trip wires. Both the TWD and the VLI are housed together in a berry compliant MOLLE compatible sheath.

MXP-TWD-IR1 Dot Laser
MXP-TWD-IR2 Line Laser (as pictured)
MXP-TWD-IR3 Dot and Line Combination Laser

MXP-LTHR-M-VL1 Green Dot Laser
MXP-LTHR-M-VL2 Green Line Laser
MXP-LTHR-M-VL3 Green Dot and Line Combination Laser (as pictured)
Leatherman MUT with Visible Laser Kit in a Berry Compliant Pouch.

MXP-LTHR-M-IR1 Dot Laser
MXP-LTHR-M-IR2 Line Laser (as pictured)
MXP-LTHR-M-IR3 Dot and Line Combination Laser
Leatherman MUT with Infrared Laser Kit in a Berry Compliant Pouch.

MXP-LTHR-IR1 Dot Laser
MXP-LTHR-IR2 Line Laser
MXP-LTHR-IR3 Dot and Line Combination Laser
EOD Leatherman 300 Supertool with Infrared Laser Kit in a Berry Compliant Pouch.

MXP-LTHR-VL1 Green Dot Laser
MXP-LTHR-VL2 Green Line Laser
MXP-LTHR-VL3 Green Dot and Line Combination Laser (as pictured)
EOD Leatherman 300 Supertool with Visible Laser Kit in a Berry Compliant Pouch.

MXP-RICK-BC
The Mithix Pro Rock and Ice Climbing Kit (RICK Kit), is a Multi-Mission, Multi-Purpose climbing assault equipment kit. The kit is comprised of top of the line ascending, descending, mountain climbing, rock climbing and ice climbing and mobility gear to offer the user a go-anywhere kit bag. The climber can choose by the hour what is best for the current operation and the rest can be left at base camp, or fill up the large backpack with other essentials and pack it all in. Static and Dynamic Lines are included. All equipment is carefully selected and made from the finest materials and name brands. 100% TAA and Berry Amendment Compliant.

MXP-CEXEE2
Combat Explosive Exploitation Kit for collection, identification and exploitation of explosive materials and other evidence. Features standard and anti-static collection/evidence bags, vials, swabs, sample spoons, sticks, pipettes and containers, etc. Kit also includes forensic evidence/data collection tools including shockproof/waterproof, high quality camera, digital voice recorder, GPS, telescoping mirror, rulers, multi-tool, photo tools, evidence markers and admin supplies. There are personal protective gloves and flexi-cuffs for safety and two explosive test kits for explosive identification. All kit components are contained within a heavy duty 3-day MOLLE compatible backpack.

MXP-CEXEE3
A site explosive exploitation kit for collection, identification and exploitation of explosive materials and other evidence. Features various collection/evidence bags, vials, swabs, sample spoons, sticks, pipettes and containers, etc. Kit also includes forensic evidence/data collection tools including high-quality digital camera, digital voice recorder, hand-held metal detector, telescoping mirrors, rulers, photo tools, light-emitting and standard evidence markers, all-weather notebook and pen and admin supplies. There are personal protective gloves and an explosive test kit for explosive identification. All kit components are contained within a heavy-duty 3-day MOLLE compatible backpack.

MXP-CEXEE-LITE
A site explosion exploitation kit for collection, identification and exploitation of explosive materials and other evidence. Features traceable and standard evidence bags, glassine envelopes and small collection bags. Kit also includes forensic evidence/data collection tools including a suite of fingerprint tools, high-quality digital camera, rulers, photo tools, tie-on tags, non-conductive tweezers, duct tape, magnifier with light, all-weather notebook and admin supplies and personal protective gloves. All kit components are contained within a tear-away zippered pouch with a drop-leg carrier.  The drop-leg carrier allows for the user to carry the pouch on their leg.

MXP-CFK
A forensics kit for collection, identification and exploitation of evidence. Features various collection/evidence bags, swabs, pipettes, sample spoons, etc. Kit also includes forensic evidence/data collection tools including high-quality digital camera, a suite of fingerprint tools, forensic measurement scale, all-weather notebook and pen and personal protective gloves.  All kit components are contained within a heavy-duty 3-day MOLLE compatible backpack.

MXP-OPACC2
Includes individual first aid kit (IFAK), high-quality digital camera, light-emitting and standard evidence markers, laser range finder, headlamp, binoculars, flagging tape, e-tool with case, safety glasses, ceramic knife, and multi-tool.  All kit components are contained within a heavy-duty 3-day MOLLE compatible backpack.

MXP-OPACC3
Includes individual first aid kit (IFAK), digital camera, light-emitting and standard evidence markers, laser range finder, headlamp, binoculars, flagging tape, e-tool with case, safety glasses, ceramic knife, multi-tool, blasting cap crimpers and tactical hand-held metal detector.  All kit components are contained within a heavy-duty 3-day MOLLE compatible backpack. Non-TAA, Non-Berry.

MXP-HMA-SUP
Includes laser Range Finders, Transits, Binos, GPS, Measuring tools, etc. Includes Injection molded case w/ custom CAD & machine cut foam.

MXP-HMA-DEMO
Includes Blasting Machines, Testers, 1 EOD Berry Backpack, 20 Personal Hook & Line Kits, Binos, Firing Cable, etc . Includes Injection molded case with wheels, w/ custom CAD & machine cut foam.

MXP-RNGSUP
Includes laser Range Finders, Transits, Binos, GPS, Measuring tools, etc. Includes Injection molded case w/ custom CAD & machine cut foam.

MXP-DEMO
Includes Blasting Machines, Testers, 1 EOD Berry Backpack, Binos, Firing Cable, etc . Includes Injection molded case with wheels, w/ custom CAD & machine cut foam.

MXP-HMA-AVK
Includes Laptop, Projector, Printer, Adapter, Accessories, etc. Includes Injection molded case w/ custom CAD & machine cut foam.

MXP-RSPNSII-HT
The Hand Tool Kits include essential tools for maintenance and repair applications. Kits include high-quality sockets, wrenches, hex keys, cutting tools, measuring tools, pliers, screwdrivers and accessories.  The tool set comes packaged in a tool chest with a carrying handle and wheels for trouble-free transport.   These Pelican cases come with removable drawers that makes transporting only the drawers around the job possible.   The ruggedized and durable case is built to withstand the rigors of day to day use.  Included in each drawer, is custom cut foam made with special compartments that securely hold all of the tools in place and keep things highly organized.  Non-berry complaint version also available. These kits can be customized to meet the needs of any job site.

MXP-GHTK
MXP-GHTK-BC
UXO / IED / Landmine Tool kit that combines general hand tools including hammers, screwdrivers, pry bars, pliers, cutters, etc, into one injection molded case w/ custom CAD & machine cut foam and layered trays for the hand tools.

MXP-GPTK
MXP-GPTK-BC
UXO / IED / Landmine Tool kit of general pioneer tools including 3 shovels, 3 axes, 3 sledges, 3 picks, 20 pairs of work gloves, a crow bar and a 60 inch digging iron. An optional version of this kit can be purchased that includes a wheeled hard case with foam blocking.

MXP-CIED-SOM1
MXP-CIED-SOM1-BC

The Mithix Pro Counter Improvised Explosive Device (CIED) Team Training Sets are comprehensive sets of equipment full of all things needed to train and equip a team of operators in the full CIED mission. These kits include multiples of Team and Individual Hook and Line Kits, Search Tools, Combat Explosive Exploitation and Forensic Kits, First Aid Kits and Supplies, Unexploded Ordnance (UXO) Training Aids, Improvised Explosive Device (IED) Training Aids, Training Tools, Visual Identification and Recognition Aids and Displays. In addition to the above, there are training scene and scenario display aids, functional and static training devices and components for helping personnel to understand the full spectrum of CIED threats. The kit also includes general supplies and tools for general and remote operations. This Comprehensive CIED Kit allows team operators to conduct searches, identify hazards, capture evidence, do UXO/IED render safe, mitigation and recovery procedures, and to do the full spectrum of training on all of the above.

MXP-HMA-GHPTK
MXP-HMA-GHPTK-BC
UXO / IED / Landmine Tool kit that combines general hand tools including hammers, screwdrivers, pry bars, pliers, cutters, etc, with general pioneer tools: shovels, axes, sledges, picks, etc. Kit Includes Injection molded case w/ custom CAD & machine cut foam for the Hand Tools.

MXP-SPTK
The Mithix Pro UXO / IED / Landmine Squad Pioneer Tool kit contains all the necessary digging, clearing, climbing, rigging and general pioneer tools for site clearance, site set-up, site bed-down, site security and site maintenance. Kit includes shovels, pick, ropes, pulleys, manual ratchet winches, bars, posthole diggers, hydraulic jack, cutters, safety gear, tree / pole climbing gear, and a lot more. All tools are housed in two large, lockable, wheeled storage containers for ease of transport and storage.

MXP-HEK
The EOD Hand Entry Kit is used for any operation where precise cutting, access, entry, diagnostics and/or disablement are being conducted. The Kit is contained in a roll-up pocketed tool pouch and includes 27 Components: 4 pc Screwdriver Set, Ceramic Knife, Mini Pry Bar, Small Vise Grip Pliers, Diagonal Wire Cutters, Needle Nose Pliers, Non-Conductive Tweezers, Stainless Steel Tweezers, Non-Conductive Forceps, Stainless Steel Forceps, Adjustable Wrench, Slip-joint Pliers, Mini Hacksaw, Inspection Mirror, Non-Conductive Probes, Razor Blades, Insulating Tape, Flashlight, Safety Pins and Wire, Cotter Pin Set, Cable Ties and Wire Strippers.

MXP-S-REMOTE
UXO / IED Semi-Remote Kit with 12 ft Carbon Fiber Hybrid Telescopic Manipulator Pole with Integrated 360 Coupler w/Spring Pin, 5-Hook Set, Telescopic Manipulator Pouch, MXP Grabber Assembly, 300 ft of 1/8″ Dyneema Tactical Line and Aussie Style Tactical Reel

See a quick video link here

MXP-S-REMOTEHD
UXO / IED Semi-Remote Kit with 12 ft Carbon Fiber Hybrid Telescopic Manipulator Pole with Integrated 360 Coupler w/Spring Pin, 5-Hook Set, Telescopic Manipulator Pouch, MXP Grabber Assembly, 400 ft of 1/4″ Dyneema Core Main Line and Heavy Duty Reel with friction brake/lock.

MXP-SFMK3
Includes Back Pack, Red Minefield Danger Signs, Plastic Sign Pegs, Zip Cable Ties, Danger Do Not Cross Tape, Mine Marking Cones, Survey Flags, etc.

MXP-DTK-001 – Field Stakes, White
MXP-DTK-002 – Field Stakes, Red Top
NON-SPARKING, NON-MAGNETIC, 1.125IN X 60IN (min. purchase of 25).

MXP-RECON
MXP-HMA-RECON
Includes GPS, Laser Range Finders, Measuring Tools, Cameras, Marking Materials, etc.

MXP-DTK
The Mithix Pro Demining Tool Kit is an individual issued field demining kit used for operations in route clearance and area clearance demining missions. It is made for operations in all types of soil, foliage and terrain conditions. Kit includes Custom Kit Pouch, Mine Probe, Big Lopper, Hedge Shear, Grass Shear, Small Pruner, Flexi-Probe, Hand Trowel, Hand Shovel, High-Strength-Low Stretch Line, Line Winder, Safe/Hazard Markers, Marker Pouch, Brush and Optional Mithix Pro EOD Folding Grapnel Hook.

MXP-EHRTK
Also known around the world as Explosive Hazard Reduction Kit, or Explosive Hazard Reduction Team Kit. These kits are comprised of components that help teams to search, find, identify, mark, recover and/or mitigate the hazards of unexploded ordnance (UXO), improvised explosive devices (IED), homemade explosives (HME) and other hazardous materials. The kits include multiples of binoculars, compasses, ropes, lines, flashlights, headlamps, tape, bags, safety glasses, gloves, marking material, tools, multi-tools, carabiners, mirrors and more, all in a large rugged backpack.

MXP-MEHRTK
This UXO / IED / Landmine kit is for up to 8 individual operators working in a team for searching, identifying, and marking hazardous materials/devices.

MXP-MEHRTK2
Mini Explosive Hazard Reduction / Mitigation Kit, with Hook, Line and Telescopic Manipulator Pole Kit is ideal for searching, locating, identifying, and marking improvised explosive device (IED), unexploded ordnance (UXO) homemade explosive (HME), booby-trap and other threatening hazards as well as the remote and semi-remote means to move or displace devices/suspect threats in an austere or unfriendly environment. Kit features Telescopic Manipulator Pole, coupler and hook, parachute cord, EOD Folding Grapnel Hook, crimpers, vise clamp with eye, hazard marking tape and markers, tape measure, brush, headlamp, and binoculars. All components are housed within a 3-day heavy duty MOLLE compatible backpack.

MXP-HTK
The EOD UXO / IED / Landmine Hand Tool Kit is used for field expedient general operations where hand tools are needed. The Kit is contained in a large roll-up pocketed tool pouch and includes everything from screwdrivers, pliers and wrenches, to a saw, hammer and pry bar; there are over 80 components in all.

MXP-HL801
Micro Hook and Line Tool Kit for Explosive Ordnance Disposal (EOD / IEDD), Bomb Squad, SWAT, Combat Engineer and Special Operations procedures. Features high quality components, stainless steel hook, low-stretch high grade Dyneema Rope, roller bearing carabiner, standard carabiner, MXP Folding Grapnel Hook, endless loop sling, small durable pouch with multiple pockets. This kit is specifically made for Improvised Explosive Device (IED), booby-trap, remote movement and remote handling operations.

MXP-HL901 (with 100 ft of line)
MXP-HL901-200 (with 200 ft of line)
Personal Hook and Line Tool Kit for Explosive Ordnance Disposal (EOD / IEDD), Bomb Squad, Combat Engineer and Special Operations procedures. Features high quality components, stainless steel hook, compact line puller, clamp, strap cutter, high-strength micro pulley, low-stretch high grade Dyneema Rope, roller bearing carabiner, standard carabiner, MXP Grapnel Hook, endless loop slings, utility razor knife, assorted pin pack and a thigh/ruck attaching case with multiple pockets. This kit is specifically made for Improvised Explosive Device (IED), booby-trap, remote movement and remote handling operations.

MXP-PDK
Includes blasting machine, single line initiator, cap crimper, fuse and cord cutter, EOD Leatherman tool, cap box, circuit tester, flagging tape, electrical tape and safety glasses.  All kit components are contained within a tear-away zippered pouch with a drop-leg carrier.  The drop-leg carrier allows for the user to carry the pouch on their thigh.

MXP-HL901-VL1 Green Dot Laser
MXP-HL901-VL2 Green Line Laser
MXP-HL901-VL3 Green Dot and Line Combination Laser (as pictured)
Personal Hook and Line with Visible Laser Identifier Kit for Explosive Ordnance Disposal (EOD / IEDD), Bomb Squad, Combat Engineer and Special Operations procedures.

MXP-HL901-IR1 Dot Laser
MXP-HL901-IR2 Line Laser (as pictured)
MXP-HL901-IR3 Dot and Line Combination Laser 
Personal Hook and Line with Infrared Laser Identifier Kit for Explosive Ordnance Disposal (EOD / IEDD), Bomb Squad, Combat Engineer and Special Operations procedures.

MXP-HL101B
Basic Hook and Line Tool Kit for Explosive Ordnance Disposal (EOD / IEDD), Bomb Squad, and Special Operations procedures. Features high quality components, stainless steel hooks, high-strength marine-grade pulleys, low-stretch high grade Kevlar Rope and other essential tools made specifically for Improvised Explosive Device (IED), remote movement and remote handling operations. Advanced Kits, Intermediate, Personal Kits and custom configurations also available. Not all Kit Components are pictured. Can be purchased in hard case, backpack or both.

MXP-PMEK

The Personal Minefield Extract Kit (PMEK) was designed for the safety of anyone who may find themselves accidentally in a minefield, booby-trapped or hazardous area. The kit does not replace special purpose equipment made for minefield breaching teams or personnel but is for anyone and everyone in hazardous duty locations where mines, UXOs, IEDs and/or booby-traps may exist. The lightweight kit and components should be carried at all times while in the field and should the user suddenly need them, the components are there to mark their known safe passage route, probe when route is unknown, mark hazards and safe route progress until they get themselves to safety outside of the hazard area. Kit includes red and white stakes, red and green chem lights for night, mine probe, lightweight tripwire feeler, and pouch. The PMEK is ideal for anyone working outside the wire.

MXP-HL601
Compact Hook and Line Tool Kit for Explosive Ordnance Disposal (EOD / IEDD), Bomb Squad, and Special Operations procedures. Features a compact version of the well known Mithix Pro Hook and Line kit components that you know and trust. Kit includes compact high quality components, stainless steel hooks, micro high-strength marine-grade pulleys, low-stretch high grade Dyneema Rope, smaller version of our famous clamps and other essential tools made specifically for Improvised Explosive Device (IED), remote movement and remote handling operations. All Components are housed in a tear away hook and loop thigh rig pouch attached to a drop-down leg carrier with thigh straps. A small Telescoping Manipulation Pole is Optional.

MXP-HL101
The Army Hook and Line Tool Kit is for Explosive Ordnance Disposal (EOD), Bomb Squad, and Special Operations procedures. The Kit features high quality components, stainless steel hooks, high-strength marine-grade pulleys, low-stretch high grade Kevlar Rope and other essential tools made specifically for Improvised Explosive Device (IED), remote movement and remote handling operations.

MXP-HL201
Intermediate Hook and Line Tool Kit for Explosive Ordnance Disposal (EOD / IEDD), Bomb Squad, and Special Operations procedures. Features high quality components, stainless steel hooks, high-strength marine-grade pulleys, low-stretch high grade Kevlar Rope and other essential tools made specifically for Improvised Explosive Device (IED), remote movement and remote handling operations. Not all Kit Components are pictured. Can be purchased in hard case, backpack or both.

MXP-HL301
The Advanced Hook and Line Tool Kit is for Explosive Ordnance Disposal (EOD), Bomb Squad, and Special Operations procedures. The Kit features high quality components, stainless steel hooks, high-strength marine-grade pulleys, low-stretch high grade Kevlar Rope and other essential tools made specifically for Improvised Explosive Device (IED), remote movement and remote handling operations. Not all Kit Components are pictured. Can be purchased in hard case, backpack or both.

MXP-HL301AF
The Mithix Pro Air Force Hook and Line Tool Kit is one of our most comprehensive kits for Explosive Ordnance Disposal (EOD), Bomb Squad, and Special Operations procedures. The Kit features high quality components including: many stainless steel hooks; high quality carbon fiber hybrid telescoping pole and coupler; eight (8) high-strength marine-grade self-opening pulleys; three (3) low-stretch, high grade Dyneema Core Ropes of differentiating color on heavy duty reels; access tools including window breaker, button pusher, door knob/handle turner and remote key turner; EOD Grapnel for semi-remote trip-wire, booby-trap and debris clearing; additional anchoring tools, bar clamp and extension rod with attachments; and all the other essential tools found in our standard kits made specifically for Improvised Explosive Device (IED), remote movement and remote handling operations. Can be purchased in hard case, backpack or both.

MXP-TANDL
MXP-TANDL2 w/Optional Items
The Mithix Pro UXO / IED / Landmine Tape and Line Kit is made for small and large bomb and projectile fuze removal IAW with US Military EOD 60 series publications. Kit includes fairlead and bridal stakes, small and large pipe wrenches, fairlead pulleys, an adjustable one-way pulley with cam lock, carabiners, small and large diameter line, pressure sensitive tape, hammer, tool bag and more. Optional Items include bomb tie down stakes, lashing rope, sand bags and 400’ of high-strength, and low-stretch line on heavy duty reel with friction brake.

MXP-HL001-004F/3A
Mithix Pro 10.5′ Carbon Fiber Telescopic Manipulator Pole, 360 Coupler, Pouch and Hook Kit (Six-Section 41in*)
MXP Carbon Fiber Hybrid Telescopic Manipulator Pole; custom saddle clamps; Mithix Pro Integrated Rotational Coupler w/ Spring Pin; Berry compliant custom MOLLE compatible Telescopic Manipulator Pouch Hook Set: 1ea “S” Hook, 1ea 2′ Standard Hook, 1ea 5.5′ Scythe/Sickle Hook, 1ea 8′ Scythe/Sickle Hook, 1ea MXP Trigger Hook

* Approximate Collapsed Length

MXP-HL001-004C/3A
Mithix Pro 12′ Carbon Fiber Telescopic Manipulator Pole, 360 Coupler, Pouch and Hook Kit (Five-Section 41in*)

MXP-HL001-004H/3A
Mithix Pro 10.5′ Carbon Fiber Telescopic Manipulator Pole, 360 Coupler, Pouch and Hook Kit (Four-Section 41 in*)

MXP-HL001-004D/3A
Mithix Pro 8.5′ Carbon Fiber Telescopic Manipulator Pole, 360 Coupler, Pouch and Hook Kit (Five-Section 29in*)

MXP Carbon Fiber Hybrid Telescopic Manipulator Pole; w/High Impact Composite Locks;  Mithix Pro Integrated Rotational Coupler w/ Spring Pin.  Berry compliant custom MOLLE compatible Telescopic Manipulator Pouch Hook Set:  1ea ‘S’ Hook, 1ea 2′ Standard Hook, 1ea 5.5′ Scythe/Sickle Hook, 1ea 8′ Scythe/Sickle Hook, 1ea MXP Trigger Hook

*Approximate Collapsed Length

MXP-HL001-004H/S
Mithix Pro Telescoping Carbon Fiber Telescopic Manipulator Pole with Hook and Pouch for Explosive Ordnance Disposal (EOD), Bomb Squad, Combat Engineer and Special Operations procedures. Features 4-section carbon fiber hybrid Telescopic Manipulator Pole, hook coupler with pin, 2” stainless steel machined hook and dedicated Nylon Cordura pouch with pocket, loops and buckle. This Telescopic Manipulator Pole and hook set are specifically made for Improvised Explosive Device (IED), booby-trap, remote movement and remote handling operations and can be used with the pin in for pulling threats, or, with the pin out for placing the hook with a line attached for remote pulling of the line after the Telescopic Manipulator Pole is removed.  Many other Telescopic Manipulator Pole types, lengths, configurations and custom configurations also available.

MXP-MX14-BC
NSN: 5340-01-686-5553

Mithix Pro Telescoping Hybrid Pole Kit, the USMC Program of Record, and known as the Sickle Stick, NSN: 5340-01-686-5553. Kit includes: Seven-Section Telescopic Pole, Pouch and Hook Set. It has an open length of 14 feet, a collapsed length of 36 inches and includes an integrated Hook Coupler with Pins for hook pulling or for hook setting with pins removed.

The Pole Kit comes complete with a Custom Pole Pouch with hook pockets to house all components in an operational ready state. Custom sizes and configurations may also be available in quantity. All weights and dimensions are nominal.

MXP-HL001-004D
MXP-HL001-004F
MXP-HL001-004
MXP-HL001-004H
MXP-HL001-004C
Telescopic Manipulator Poles are made for semi-remote operations and for use with Hook and Line Tools for Explosive Ordnance Disposal (EOD), Bomb Squad, SWAT and Special Operations procedures. Features high quality components, lightweight tubing in either fiberglass, carbon fiber or hybrid construction and in 10 ft. and 12 ft., 4 or 5 section choices depending on material. Each Telescopic Manipulator Pole comes with a mounted MXP Coupler for easy quick connect and disconnect of MithiX Pro Hooks, Multi-Hook Couplers, Strap Cutters, etc. These Telescopic Manipulators are essential tools made specifically for Improvised Explosive Device (IED), remote movement and remote handling operations.

See a quick video link here

MXP-VBK
The Mithix Pro Vehicle & Building Access Kit is made for all major tasks to gain access to a vehicle or building. As stand-alone components or in concert with other kit components, there isn’t anything you cannot accomplish!

MXP-FROK

• Mithix Pro Hook & Line Kit w/8.5′ Carbon Fiber Hybrid Telescopic Manipulator Pole and Pouch
• Mithix Pro Personal Hook & Line Kit
• Mithix Pro Firing Cable – 300 ft. of twisted pair 18 gauge copper multi-strand wire w/cable winder
• CD450-4J M Blasting Machine Olive Drab (NSN: 1375-01-417-7104)
• Leatherman EOD 300 Supertool
• Flashlight – Streamlight PolyStinger w/vehicle charger
• Mithix Pro/RA 27mm Disruptor – w Soft Case
• Mithix Pro 300 ft. Lightweight Dyneema Line w/Line Winder
• Mithix Pro Custom Soft Backpack to Fit All Components
• Hard Case to Fit All Items

MXP-S4R
Introducing the Sand & Sea, Search, Stabilize and Recover (S⁴R) Kit. From underwater to port to beach operations, and from search to IED to Post Blast and evidence marking, this is the kit! Tools are robust for water/corrosion resistance and manufactured in a Hi-Vis fluorescent contrasting finish with light reflective over coating for easily finding in murky waters and muddy banks. This kit has it all for maritime operations including: evidence tags and markers; grid/evidence weights, floats and markers; deep water LED markers; tool and evidence tethers; magnets; and water friendly hooks, lines, pulleys and accessories.

MXP-HL001-012B
This compact, high-strength, folding grapnel hook is used for field expedient procedures. Can be thrown and used to clear debris, remotely disturb suspect items, pull/proof trip line potential hazards and/or to grab and drag items.

See a quick video link here

PMK-90112
The UXO / IED 5-piece Stainless Steel Mine Probe Kit comes complete with four (4) Stainless Steel rod pieces with knurling, one handle and a MOLLE/PALS compatible pouch in black, green or tan. Dimensions: 30” x 1/4” nominal length; usable lengths in 18”, 24” and 30”.

PMK-90111
The UXO / IED 5-piece Titanium Mine Probe Kit comes complete with four (4) titanium rod pieces with knurling, one handle and a MOLLE/PALS compatible pouch in black, green or tan. Dimensions: 30” x 1/4” nominal length; usable lengths in 18”, 24” and 30”.

PMK-90113
The 3-piece UXO / IED Titanium Mine Probe Kit comes complete with two (2) titanium rod pieces with knurling, one handle and a MOLLE/PALS compatible pouch. Dimensions: 1/4”  x 18″ nominal length.

MXP-PMK-IR1 Dot Laser
MXP-PMK-IR2 Line Laser (as pictured)
MXP-PMK-IR3 Dot and Line Combination Laser 

MXP-PMK-VL1 Green Dot Laser
MXP-PMK-VL2 Green Line Laser
MXP-PMK-VL3 Green Dot and Line Combination Laser (as pictured)

MXP-DCC/LTHR
Double Blasting Cap Crimper and EOD Leatherman 300 Supertool combination set in a Berry Compliant Pouch.

MXP-LTHR
EOD Leatherman 300 Supertool in a Berry Compliant Pouch.

MXP-GRABBER
Mithix Pro Grabber Assembly without Telescopic Manipulator Pole or Main Line. Works on any of our Mithix Pro Telescopic Manipulator Pole and couplers and can stay attached for picking up objects or can detach and be pulled with a rope from a safe distance.

MXP-HL101-021S – Cantilever Jaw, Small
MXP-HL101-021C – Cantilever Jaw, Standard
Heavy duty aluminum and steel clamp with replaceable teeth, rigid spring action, and cantilever mechanism with lanyard. Used for purchase point on pliable material or as a firm grip on soft-sided objects. Cantilever action enables the clamp to tighten the more pull is applied. 

MXP-HL001-001
Stainless Steel  2” hook with ¾” opening and barb for grabbing bags, straps, etc. and used with or without hook coupler on extension rods and Telescopic Manipulator Poles. Hook can be retained in the Telescopic Manipulator Pole coupler or by itself.

MXP-HL001-040
Stainless Steel Hook with automatic, spring loaded gate for snatching objects and retaining.

MXP-HL101-006
Corrosion Resistant Stainless Steel hooks are designed to accomplish what you need too.  Special design allows for hook to be used connected directed to the main line, hook holders or hook setting devices.  Multiple connecting points allow for simultaneous use with carabiner/snap links, shock cords, or other connectors.

MXP-HL101-007
Corrosion Resistant Stainless Steel hooks are designed to accomplish what you need too.  Special design allows for hook to be used connected directed to the main line, hook holders or hook setting devices.  Multiple connecting points allow for simultaneous use with carabiner/snap links, shock cords, or other connectors.

MXP-HL001-043
Corrosion Resistant Stainless Steel hooks are designed to accomplish what you need too.  One piece high strength design for maximum strength.  Special design allows for hook to be used connected directed to the main line, hook holders or hook setting devices.  Multiple connecting points allow for simultaneous use with carabiner/snap links, shock cords, or other connectors.

MXP-HL001-044
Corrosion Resistant Stainless Steel hooks are designed to accomplish what you need too.  This design allows the operator to push and pull an object from the same position, minimizing the need to move around hazardous items.  Each hook to be used connected directed to the main line, hook holders or hook setting devices.  Multiple connecting points allow for simultaneous use with carabiner/snap links, shock cords, or other connectors.

MXP-HL001-007
Strap Cutter with replaceable razor blade, carabiner/finger hole and Telescopic Manipulator pole coupler. Cutter is used for remotely or hand cutting straps, belts and other materials used to hold things in place or together.

MXP-HL001-007A

The Mithix Pro Rope and Wire Cutter is a manual cutter for cutting round ropes, lines and wires. The cutter comes with replaceable razor blades and has a carabiner/finger hole allowing the cutter to be placed by hand or with the use of a Telescopic Manipulator pole and coupler. The cutter can be placed with a line attached and then can be pulled from a remote distance to safely cut through the target rope or wire.

Video 1: Cutting Wire
Video 2: Cutting Rope

MXP-HL001-051 – 5.5″
MXP-HL001-052 – 8″
The Reaper Tool Hooks can be used for ground proofing, pulling cables/ropes, moving debris, etc.

MXP-HL001-039
The Trigger Gate Carabiner Hook can be set in the gate open position and used to trigger and lock on an object in the hook placement mode to leave a line behind and remove the Telescopic Manipulator Pole. For extra heavy pulling, a main line can be attached directly to the center of the carabiner (under the set open gate) in lieu of the 5/8″ hole for over 5000 lbs of pulling capability.

See a quick video link here

MXP-HL001-009
High Quality Carabiner with integrated roller bearing. These Carabiners have a normal gate and are used as an additional pulley, a traveling runner on a taught or loose line or for standard connections, rigging, purchase points, direction changes and multiple purchase systems (not used for life-saving; colors may vary).

1900 lbs
MXP-HL901-002k – 50 ft
MXP-HL901-002 – 100 ft
MXP-HL901-002j – 200 ft

600 lbs
MXP-HL901-002c – 50 ft
MXP-HL901-002a – 100 ft
MXP-HL901-002b – 200 ft

1900 lbs
MXP-HL901-002k-W– 50 ft (w/Medium Rope Cord Winder)
MXP-HL901-002-W – 100 ft (w/Medium Rope Cord Winder)
MXP-HL901-002j-W – 200 ft (w/Large Rope Cord Winder)

600 lbs
MXP-HL901-002c-W – 50 ft (w/Small Rope Cord Winder)
MXP-HL901-002a-W – 100 ft (w/Small Rope Cord Winder)
MXP-HL901-002b-W – 200 ft (w/Medium Rope Cord Winder)
MXP-HL901-002d-W – 250 ft (w/Large Rope Cord Winder)
MXP-HL901-002e-W – 300 ft (w/Large Rope Cord Winder)

600 lbs
MXP-HL001-053F/L – 100 ft (w/Small Rope Bone Folding Handle)
MXP-HL001-054F/L – 200 ft (w/Medium Rope Bone Folding Handle)
MXP-HL001-055F/L – 250 ft (w/Large Rope Bone Folding Handle)

 1900 lbs
MXP-HL001-056F/L – 100 ft (w/Medium Rope Bone Folding Handle)

MXP-HL001-0053 – Small
MXP-HL001-0054 – Medium
MXP-HL001-0055 – Large
Cord winder for lightweight line, allows for fast line retrieval and deployment.

MXP-HL001-053F – Small
MXP-HL001-054F – Medium
MXP-HL001-055F – Large
Cord winder for lightweight line, allows for fast line retrieval and deployment.

See a quick video link here

MXP-TAC300
Tactical Reel with 300 ft of 1900 lb ABS High-strength, very low stretch Dyneema Main Line used for tactical operations. This line and reel are designed for field expedient use where low stretch and high strength is needed and where size needs to be minimal. 1900 lb Break Strength (other sizes also available).

MXP-FCR100LITE
Tactical Reel with 100m of twisted pair copper 22AWG Wire used for tactical operations.

MXP-HL101-002/003
Line Reel comes equipped with a permanent handle, friction braking system, integral handle and stand. It is housed in a protective Reel Bag with sturdy handles and MOLLE style straps for attaching to the Backpack if desired. 400 feet of 1/4” (6.5mm) Main Line with double braid Kevlar/Dyneema/Aramid core and Polyester fiber abrasive resistant cover. Rope is affixed with a snap link on the operational end.

MXP-HL101-002
Heavy Duty w/Friction Brake Reel

MXP-HL101-003
400 feet of 1/4″ (6.5mm) Main Line with double braid Kevlar/Dyneema/Aramid core and Polyester fiber abrasive resistant cover

MXP-HL101-026
Pulley opening device easily attaches and detaches to Main Line to open the Self-opening Pulley at a desired point for change of direction applications.

MXP-TAC-034
Small, lightweight micro pulley, sling and carabiner for use in expedient operations.

MXP-HL001-011A
Swivel-Faced, Micro Pulleys with swivel side plates for inserting rope/main line. Pulleys are used to reduce friction while pulling, hoisting, opening and all other actions where general fair leading is required. 3620 lb Break Strength (not rated for climbing; colors may vary).

MXP-HL101-027 – Large
MXP-HL001-032 – Medium
These are marine grade pulleys that utilize a swivel connection and a swivel opening front plate. Pulleys are used to reduce friction while pulling, hoisting, opening and all other actions where general fair leading is required.

MXP-HL001-076 – Large
MXP-HL001-037 – Small
MXP-HL-MSOB – Micro
These are marine grade pulleys with selectable self-opening action. These pulleys utilize a swivel connection and an opening front plate. Pulleys are used to reduce friction while pulling, hoisting and change of direction maneuvering.

Thick aluminum base assembly used to hold tools for building and vehicle access. Ideal for recessed handle and button applications, opening hoods and trunks, for high 4×4 truck and rooftop applications or just for a stable platform without touching the vehicle. Able to tilt in any number of angles and adjusts to many different leg spread angles with simple pins in seconds. Can be collapsed and carried with legs installed in the closed position. Provides a stable platform for a number of tools listed above as well as the Block and Tackle Assembly, hoisting applications and many other uses.

MXP-TAM – Medium Duty Tripod
Medium Duty: Telescopic Manipulator Pole affixed with a Coupler that allows for quick attachment to the Tripod. Telescopic Manipulator Pole legs can be lengthened or shortened individually to an infinite number of lengths.

MXP-TAH – Heavy Duty Tripod
Heavy Duty: 1.25″ thick heavy-duty aluminum legs connect to tripod base assembly for quick attachment to the Tripod.  Aluminum leg sections can be added and removed for differing heights.

MXP-VBK007
Block and Tackle Assembly with line and 4 to 1 mechanical advantage. Excellent tool for lifting, hoisting, or opening heavy objects. Works well for vehicle hood and truck opening applications and for removing objects from trunks remotely. Has swivel shackles affixed to prevent binding. Designed for use with the Tripod Assembly but can also be used separately.

MXP-HL901-004A
The Ceramic Knife is a fixed blade knife with hard poly Sheath. It is made of very sharp ceramic for EOD operations where precise, non-conductive cutting is required.

MXP-HL901-005
Lightweight but strong line puller for line sizes 3/32” to 1/8”. Saves hands and rope from cutting and abrasion and allows for greater pull loads and duration. Complete with Dyneema Lanyard.

See a quick video link here

MXP-HL101-004
Aluminum Line Puller with nylon cinch cleat for ease in pulling the main line.

MXP-ESK
The Mithix Pro EOD / UXO / IED / Landmine Search Kit is a comprehensive, lightweight, field ready tool kit that includes essential individual search tools for anyone operating in a hazardous area. The kit is housed in a backpack and includes probes, lights, markers, lines, pulleys, tapes, carabiners, stakes, multi-tools, grapnel, forensic and evidence tools/materials and many other needed components.

MXP-PPK
Personal Protection Equipment in bulk set, for remote operations. Set includes gloves, hearing protection, burn blankets and eye protection for multiple users.

MXP-DSCLAW 3-Pack
The Door Secure Claw is used for two purposes, expedient securing of multiple doors in corridors in special law enforcement/tactical operations and, in general purpose expedient door securing. For SWAT or tactical ops, the Door Secure Claw is used to quickly slap on door knobs and/or handles in hallways and corridors that are cleared to prevent potential enemies from coming out behind the ops team. This is especially handy in apartments, hotels and anywhere multiple doors are encountered and protects the rear of an exposed assault team. For general purpose expedient use, the Door Secure Claw can be used in active shooter / violent intruder or other situations to quickly and easily secure doors for temporary safety measures. The Door Secure Claws can be used on door knobs and door handles easily by placing the teeth of the claw over the door wood, steel or other molding adjacent to the knob or handle and putting the attached zip tie over the knob or handle and pulling hard and tight to secure in place. Can be used on doors opening in or out; the door knob/handle can be turned/unlatched but not opened. Removal is as simple as cutting the zip tie and replacing with a new one for repeated use. One size fits most applications; see the video link to see the Door Secure Claw in action.

See a quick video link here

MXP-PARA-100
MXP-PARA-100-BC
Berry Compliant 550 Parachute Cord, 1000FT Spool

MXP-FCR500 (1640 ft)
MXP-FCR1000 (1000 ft)
MXP-FCR250 (820 ft)
MXP-FCR100 (328 ft)
Heavy Duty Reel with friction brake/lock with twisted pair 18 gauge copper multi-strand firing cable wire (installed), Made in USA

MXP-HAZMARK009
Tape, Barricade 3 inch x 300 ft – Bomb Squad – Do Not Cross

MXP-HA-10
Anchor, Door Hinge (10 Pack)
MXP-HA-3
Anchor, Door Hinge (3 Pack)
MXP-HA
Anchor, Door Hinge

See a quick video link here

MXP-HL001-018 – Standard
MXP-HL001-018a – Large
Extension Rod Anchors with changeable soft grip and spiked grip feet come in two sizes for fitting between door frames, hallways or where an anchor point is desired over a span. Rod may be used in a horizontal or in a vertical attitude such as up and down or side-to-side within a door frame. Warning: Spikes on spiked feet are very sharp, use caution when using!

MXP-HL101-018
Solid, rugged steel construction Pitons for use in anchoring in hard soil, pavement or cracks in masonry.   Used for purchase points and in conjunction with pulleys, lines and carabiners for lines of pull.

MXP-HL101-019 (single)
These are marine grade, 4 ½” Vacuum Cups. The pump action creates vacuum and reduces the threat of pushing on/disturbing the surface to achieve suction. Bail type anchor point swivels with direction of pull, user can also install an eye or other threaded (1/4-20) attachments to the additional central anchor point.  Compatible with Window Breaker, Button Pusher and Key Turner components.  Can also be used for purchase points and in conjunction with pulleys, lines and carabiners for lines of pull.

MXP-VBK-011.01
Solid aluminum anchor pad with adhesive backing, attaches easily to metal, wood, drywall, glass, and other clean dry material.  Minimum contact/cure time is required to achieve maximum working loads.  ¼”x20 threaded hole allows it to hold Window Breaker and Button Pushing Assemblies. Heavy duty aluminum is specifically designed to allow these anchors to be reused over and over again, simply pry anchor from item its adhered to, remove remaining adhesive and clean the anchor, replace with fresh adhesive.

MXP-HL101-013 – Standard (as pictured)
2 1/2” x 3” Solid Aluminum Anchor Pads with adhesive backing pads. Used for purchase points and in conjunction with pulleys, lines and carabiners for lines of pull.

MXP-VBK-004 – Small
5 Pack
1 1/4″ x 2″ Solid aluminum anchor pad with adhesive backing, attaches easily to metal, wood, drywall, glass, and other clean dry material.  Minimum contact/cure time is required to achieve maximum working loads.  5/8” diameter hole allows for connection to main line or other line for pulling. This size is ideal in vehicle and building access applications for small lightweight cup holders, glove box latches, ashtray drawers, center console compartments, household small drawers and areas where larger adhesive pads don’t fit. Heavy duty aluminum is specifically designed to allow these anchors to be reused over and over again, simply pry anchor from item its adhered to, remove remaining adhesive and clean the anchor, replace with fresh adhesive.

MXP-HL101-015 – 10 Pads
MXP-HL101-015B – 100 Pads
The replacement adhesive anchor pads are double-sided, very high bond pads made to the 2.5″ x 3″ dimensions of the standard Mithix Pro Adhesive Anchors. They also fit as replacements for the Window Breaker, Button Pusher and Recessed Button Slider components. These adhesive pads are high quality, high-bond pads tested to have the ideal flexibility, temperature range, fast cure time and best adhesion properties suited for Bomb Squad Operations.

MXP-HL001-020 – Small
MXP-HL001-021 – Large
Metal and cable wall nuts for an anchor point in cracks and crevasses.

MXP-HL101-029 – Large
MXP-HL101-029B – Medium (as pictured)
Backpack contains pockets, compartments, MOLLE webbing, straps and dividers for organizing medium and smaller items. Available in medium and large.

MXP-VBK003

Button Pusher/Puller Assembly, Recessed Handle (Slide Configuration)
Simple design that allows for the button pusher to attach near the button being pushed or pulled using the Suction Cup, the Self-Adhesive anchor pad or the Tripod Mount. Various configurations can be used to push or pull recessed buttons, hard to reach levers or other unique applications. Simple pull in the lever slides in a special cut groove to activate levers, buttons, etc.; can also be turned upside down for more options. Easily adjusts for various lengths in seconds with multiple pins hole.

Button Pusher/Puller Assembly, Recessed Handle (Pivot Configuration)
Variation of the above Slide Configuration, this simple design allows for the button pusher to attach near the button being pushed or pulled using the Suction Cup, the Self-Adhesive anchor pad or the Tripod Mount.  Attaches by pin as a fulcrum in various positions depending on application for a pivot/tilt action to actuate buttons/knobs remotely.

MXP-HL001-008
This NFPA rated carabiner meets/exceeds ASTM F-1956 standards for light duty rescue carabineers.   Special design key lock nose prevents snagging on webbing, ropes or harnesses.

MXP-HL101-020
These are Standard Carabiners with a normal gate and used for standard connections, rigging, purchase points, direction changes and multiple purchase systems (not used for life-saving; colors may vary).

MXP-HL101-012 10” Vise Grip Standard Clamp w/Eye
MXP-HL001-023 7” Vise Grip Clamp w/Eye
MXP-HL901-006 5” Vise Grip Clamp w/Eye
10, 7, 5 inch Vise Jaw Grips with one-hand release and equipped with an anchor eye. Used for purchase points and in conjunction with pulleys, lines and carabiners for lines of pull. Grips may also be used to grab objects to provide a means to remotely move to a safer location.

MXP-HL001-019 12” Large Mouth Vise Grip Clamp w/Eye
12 inch ratcheting Vise Jaw Grips with one-hand release and equipped with an anchor eye. Used for securing to round and conical objects like door knobs or where a bigger opening jaw is required. Also used for purchase points and in conjunction with pulleys, lines and carabiners for lines of pull. Grips may also be used to grab objects to provide a means to remotely move to a safer location.

MXP-HL001-027 9” Needle Nose Vise Grip Clamp w/Eye
9 inch ratcheting needle nose clamps long slender jaw set allows for reaching into those tight spots a where other jaws/tips can’t go.  An eye on the clamp allows for easy attachment of main or other line.  Simple and easy to operate release of ratchet action.

A – MXP-HL901-006-BC 5” Vise Jaw Clamp w/Eye
B – MXP-HL101-012-BC 10” Vise Jaw Standard Clamp w/Eye
MXP-HL001-023-BC 7” Vise Jaw Clamp w/Eye
10, 7, 5 inch Coated for Reduced Conductivity Vise Jaw Clamp with one-hand release and equipped with an anchor eye. Used for purchase points and in conjunction with pulleys, lines and carabiners for lines of pull. Clamps may also be used to grab objects to provide a means to remotely move to a safer location.

C – MXP-HL001-027-BC 9” Needle Nose Vise Jaw Clamp w/Eye
9 inch Coated for Reduced Conductivity needle nose clamps with long slender jaw set that allows for reaching into those tight spots a where other jaws/tips can’t go.  An eye on the clamp allows for easy attachment of main or other line.  Simple and easy to operate release of clamp action.

D – MXP-HL001-019-BC 12” Large Mouth Vise Jaw Clamp w/Eye
12 inch Coated for Reduced Conductivity Vise Jaw Clamps with one-hand release and equipped with an anchor eye. Used for securing to round and conical objects like door knobs or where a bigger opening jaw is required. Also used for purchase points and in conjunction with pulleys, lines and carabiners for lines of pull. Clamps may also be used to grab objects to provide a means to remotely move to a safer location.

MXP-HL001-022a
Heavy Duty Bar Clamp incorporating reversible jaws and soft jaws, adjustable anchor point and one-hand operation. This clamp is used to provide an anchor point and/or pulley point.

MXP-HL001-024
The Center Line Branch Clamp can be used with 1/8”, 3/16” or ¼” rope to provide a central line of pull on one length of rope when two ends are connected to different operations or at different points of the same operation.

MXP-HL101-022 – 6”
MXP-HL101-022a – 8”
Stainless steel clamps with locking mechanism and serrated teeth.

MXP-HL101-022-T – 6″
MXP-HL101-022A-T – 8″
Black, reduced conductivity coated clamps (as pictured) with locking mechanism and serrated teeth.

MXP-HL101-011
Lightweight spring grip with wire cable and eye for attaching to main line or other snap hook type attachments.  Includes cushioned grips and jaws, jaw opening accommodates items up to 2 inches.

MXP-VBK006 – Narrow Handle Clamp
MXP-VBK005 – Handle Wide Clamp
10 inch Vise Jaw Grips with one-hand release and equipped with an anchor eye. Used in building and vehicle access for gripping smaller handles, levers, knobs, buttons, etc. Also used for securing to objects for purchase points and in conjunction with pulleys, lines and carabiners for lines of pull. Grips may also be used to grab objects to provide a means to remotely move to a safer location.

MXP-HL001-046
The Mithix Pro 360 Hook Coupler allows for attachment of all Mithix Pro Hooks, has a 360 degree rotation with locking positions and a spring pin assembly for dual mode use. Telescopic Manipulator Coupler can be used for hook pulling or hook placement modes by use of the integrated spring lock back pin.

MXP-HL001-047
The Hook Setter/Hook Holder coupler utilizes all of the included hooks to either pull, push or set a hook for a remote pull.

MXP-HL101-023
Standard Door Wedges used for stopping or holding open hinged, sliding, swiveling or rolling objects (colors may vary).

MXP-HL001-013 – Medium
MXP-HL001-014 – Large
The Endless Loop Slings come in various lengths. They are used for purchase points, changes of direction and for cinching around/over larger items for anchoring or moving.  Because of their flat design and high strength, they are also ideal in vehicle and building access for using over brake, hood and trunk release levers, center console and glove box latches, under hood releases and as anchor points to head rests and for pulleys and lines of pull.  Available in 60 and 120 cm.

MXP-HL101-010
Oversized (size 8/0) three prong hook with ring used for snagging, grappling, tearing or as a purchase point.

MXP-VBK-009
Key Turner works with both large and small keys, including those with integrated electronic fobs.  The key is installed to the turner and it and the combination is inserted to the key lock, the supplied length of Dyneema line is wrapped around the turner and when pulled turns the key in the lock.  Includes the key turner and a unique MithiX Pro designed change of direction pulley that can be mounted to either the suction cup or adhesive anchor.

MXP-HL101-028 – lighted (as pictured)
MXP-HL101-028A – non lighted
Telescoping Pocket Search Mirror with LED lights. Mirror folds small for easy transport and storage or extends out to beyond 24 inches to look under/around objects. LEDs are ideal for close up white light, last an ultra long time on provided batteries and do not burn out like traditional incandescent bulbs. Non lighted version also available.

MXP-HL001-004F.1
The Telescopic Manipulator Pouch is used to store and transport the Telescopic Manipulator affixed with the 360 Coupler and the associated hooks. The pouch has pockets on front and back for the various hooks, loops for attaching to backpacks via their compression straps and a buckled top flap to secure the Telescopic Manipulator inside.

MXP-HL101-002A
Bag designed especially to house the reel assembly with line.  Rugged, soft-sided collapsible/foldable, easy open zipper closure, carry handles.

MXP-HL001-028
Steel Wood Screw Eyes for providing a solid anchor point in wood and similar materials.

MXP-HL001-049
D-Shaped Shackle for additional connection and anchoring (for example , connecting slings, chains, cables or anchoring to existing on-site.

MXP-HL101-014S – Small
MXP-HL101-014L – Large
Heavy Duty Shock Cords used for spring action after remote moving or opening of doors, drawers, and objects, or to hold items out of the way of operations.

MXP-HL001-050
Flat eye-and-eye slings, also known as Type 3, are very versatile and lay in a flat position for easier removal from beneath the load.  1-Ply Web Sling Flat Eye & Eye, 1″ Width

MXP-HL101-016
The Rope Sling is 6 ½ feet long with crimped loops. It is used for purchase points, changes of direction and for cinching around/over larger items for anchoring or moving.

MXP-HL001-015A – Short
MXP-HL001-015L – Long
The Sling Webbing with D-Rings is in two lengths (Long- coyote brown, short – black) with D-Rings for slip loop attachments. It is used for purchase points, changes of direction and for cinching around/over larger items. Customized colors are available.

MXP-HL101-017 –  Long
MXP-HL101-017B – Short
The Wire Rope Sling is 3 or 6 ½ feet long with a soft and a rigid crimped on loop. It is used for purchase points, changes of direction and for cinching around/over larger items or over/around sharp edged objects.

MXP-HL101-030
Anchor Bridge with pivot points for use with two Suction Anchors. Design allows for purchase points on curved or irregular angled objects as well as flat surfaces.  Bridge consists of three primary parts; the bridge and two swivel balls that mount direct to the suction cups via a threaded stud on a plate.  Available in medium and large.

MXP-VBK001
Window Breaker Assembly
Spring loaded, self-resetting window breaker works on simple cantilever design.  The breaking/cutting tip is a long lasting cutter that has a total of three cutting edges that can be rotated when a fresh tip is required, this is done with simple hand tools.  The window breaker works with BOTH the suction cup anchor and supplied self-adhesive anchor. Easily adjusts for various heights with a spring loaded pull pin.

Button Pusher Assembly
Uses the reverse side of the Window Breaker Assembly.  Allows for the button pusher to attach near the button being pushed or pulled using the Suction Cup, the Self-Adhesive anchor pad or the Tripod Mount.  Various configurations can be used to push or pull buttons or other unique applications. Simple pull in the lever pushes the button in, opening the mechanism.  Easily adjusts for various heights in seconds with use of a spring-loaded pin.

MXP-TIBAR-L
Titanium Pry Bar and Digging Tool, Large
MXP-TIBAR-LM
Titanium Pry Bar and Digging Tool, Large (slim fit for Molle webbing – not pictured)
MXP-TIBAR-M
Titanium Pry Bar and Digging Tool, Medium
MXP-TIBAR-S
Titanium Pry Bar and Digging Tool, Small (not pictured)
Mithix Pro Ti-Bar – EOD and Special Ops Titanium Pry Bar and Digging Tool. This tool has multiple functions from prying and digging, to nail pulling, wrenching and oxygen valve shut off depending on which size model. Made from 100% Titanium, the large measures approximately 12” x 1.25”, the medium 7.5” x 1” and the small 5.5” x .75”. These inherently lightweight multi-use tools are ideal for dismounted operations, special ops or anywhere lightweight or low mag/non-mag tools and capabilities are desired.

See a quick video link here

MXP-HMA-RECON.08
Caliper, Outside, 6″
MXP-HMA-RECON.07
Caliper, Inside, 6″
Inside and Outside Calipers, 6”. Ideal for outside, all-weather and dismounted operations for search and reconnaissance of ordnance, UXOs, IEDs  and unknown items. Made of all Stainless Steel components and Made In the USA.

Mithix Pro is the manufacturer of the MK 1 Rocket Wrench Assembly. The Rocket Wrench is used by EOD personnel on UXO remote fuze removal utilizing electric or non-electric .50 caliber blank ammunition. Kit includes: Rocket Plate with Breech and Venturi Plugs, spare Breeches and Venturi Plugs, Jaw Frame Slide Assembly, Conical Jaws and Straight Jaws, Custom Cut Foam Container, Accessories, Inventory Card and Optional Fuze Removal Adapters. This is a limited user item; availability is limited to specific end-users and availability is limited by need/case. Contact us for more details.